How To Do Corners With Led Lights
Smart light strips have many uses, especially in creating an aesthetic in your home. You tin stick them nether kitchen cabinets and around your Goggle box. You can create different moods in your bedroom or employ them as a night lite. In this article, I explicate which equipment you can utilize to connect light strips around corners.
Smart strip lights can be installed around corners. Yous tin stick one strip on one wall of the corner and a 2nd strip on the other wall. These 2 strips can be connected using a corner connector or cable. Some strips tin can exist bent around corners. And at that place are some other tricks you can try.
I besides discuss which smart low-cal strips tin be aptitude and which can exist cut. If you are unsure almost the best way to brand your smart light strip become around a corner, read on.
- Can I Bend Strip Lights? When to be careful.
- Philips Hue White and Colour Ambiance Lightstrip Plus
- Govee Wi-Fi RGB LED Strip Lights
- TP-Link Kassa Smart Light Strip
- Ikea Myrvarv
- How To Connect Two Separate Light Strips At a Corner
- Using a connector
- Soldering the light strips
- Using a cable connector
- Connecting Philips Hue Lightstrips
- Tin I Cut My Smart Strip Lights Shorter?
- Using leftover light strip pieces afterward cut
- Why can't RGBIC light strips be cut?
- Dwelling house Streamliner's Take:
Can I Bend Strip Lights? When to be careful.
Some smart calorie-free strips can be bent easier than others. It depends completely on how thick they are and on their quality. If a light strip is very thick, it volition be difficult to curve. It also won't adhere to the wall well when bent. Thinner strips curve more easily but may tear. Here are some examples.
Note that some of these examples are based on a review by Rachel Murphy at Reviewed.com.
Philips Hue White and Color Ambiance Lightstrip Plus
These are quite difficult to curve. They feel rather thick and are durable, but will not adhere to a surface well when they are bent.
Govee Wi-Fi RGB LED Strip Lights
This light strip is very thin and piece of cake to bend. Yous can simply stick it effectually a corner. Only be certain of where you want to stick it. Because it is so sparse, the chances are high that information technology will tear if y'all effort to relocate it later.
TP-Link Kassa Smart Light Strip
These lights are very thick. This makes them poor contenders for being bent and stuck across a corner.
Ikea Myrvarv
This low-cal strip is congenital into a low-cal-diffusing tube. Information technology is not the ideal option for bending because it is so thick.
If you have a thick smart light strip, or the material feels cheap, don't worry. Bending is non a prerequisite for connecting light strips around corners.
In a 2017 study by Statista, but 32% of respondents had ever heard of LED lightstrips by name.
statista.com
How To Connect Two Dissever Lite Strips At a Corner
You tin can stick i light strip on one wall of the corner and the other strip on the other wall. Try to become them onto the same level so they are direct.
Using a connector
If the lights come across correct at the ends of the walls, or right in the corner, they tin can be connected with an 50 Shape Connector.
Make sure that you connect the positive ends of the ii strips.
The corner connector may need to be secured onto the wall. But if the adhesive tape on the two strips is stiff plenty, this might not be necessary.
These corner connectors are likewise a nifty option if you don't want a visible space between the two strips.
When choosing a connector, cheque the following:
- Brand sure that the number of pins on the connector matches the number of terminal pads on the light strip.
- Make sure that the order of the pins (for example RGB) matches the gild of the terminal pads on the light strip.
- Yous can usually buy different colors of connectors. If you lot have a white wall, a white connector will be most camouflaged.
Soldering the light strips
If you don't have a connector or don't want to spend $x on buying 1, information technology is possible to solder the two strips together. Y'all demand to solder a connexion between each pair of terminal pads at the ends of the light strips.
I suggest soldering the strips together before sticking them to the wall.
Using a cable connector
If the lights strips do non extend into the corner, you may demand to use a cable connector like the four Pivot RGB Male and Female Connector Wire Cable(10 Pack) with ten x Male four Pivot Plugs for 5050 3528 RGB LED Light Strip
These cables take a connector on each end. One end can exist clipped onto i smart light strip and the other stop onto the second strip. The cable in the center connects the two strips and can bend around a corner. If it is an inside corner, you can stick the cable into the corner or secure it with clips.
Connecting Philips Hue Lightstrips
If you are using Philips Hue Lightstrips, the Litcessory products will make your life easier. This brand produces connections specifically for the Philips Hue Lightstrips.
If your strips are too long and are jutting over the corner, you may accept to cutting them.
Can I Cutting My Smart Strip Lights Shorter?
Smart lite strips, except for RGBIC strips, can be cut shorter to fit onto a specific surface. Many have markings to show the best place to cut, but this may consequence in only 1 functioning strip. There are ways of reusing the cut ends of a strip, for example by using a Litcessory adaptor.
Delight make sure that your lite strip is not continued to a power source when you cut it!
Before cut your smart light strip, think nearly how you want to use the pieces.
If you have only one calorie-free strip for the corner, you will want to use both cutting pieces, i for each wall. Just considering you are connecting them to each other, you lot don't demand to connect the 2nd half to a new ability source.
In this case, do non cut the strip on the cutting marking on the strip. Instead, employ a precipitous razor blade to remove the plastic around the light strip at the bespeak where you want to cutting it.
You will betrayal a link of soldered connection points. Advisedly cut down the middle of these solder points. This volition permit you lot to extend both cutting pieces.
You tin so join the ii pieces with a corner connector, cable, or past soldering them.
Y'all should only cut a strip on the cutting marker (a dotted line) if you don't need the second piece.
Using leftover light strip pieces after cutting
If you want to cut a light strip but not utilize it to connect around a corner, yous can connect both sides to a power source. Then the second half doesn't go to waste product. Information technology can be used elsewhere in your abode.
It is possible to buy a connector with a clip on one side and an exposed wire on the other side. You tin use such a connector to make the cut end of the smart strip light usable. You will have to connect the exposed wire to a controller, which is connected to a ability source. This will allow you to command the cut end remotely.
If you are cutting a Philips Hue Lightstrip, you can employ a 6-Pivot to Cut-Finish connector from Litcessory to connect information technology to a second light strip. You will need to attach a connector to one end of each of the two strips you desire to join. You will besides need a Litcessory Extension Cablevision.
Why can't RGBIC light strips be cut?
RGBIC lite strips have an IC chip. This allows each light in the strip to shine in a different color at once.
The IC scrap is programmed to control the exact number of LED lights as are in ane RGBIC strip. If you cut the strip, this will reduce the functionality of the chip. It may fifty-fifty result in the whole strip non working.
RGBIC light strips do non take cut markings (normally indicated by little scissors) on them. A regular RGB strip light normally has these markings.
We wrote an insightful article most the four Differences Between RGB And RGBIC Strip Lights. If this would interest you experience complimentary to caput on over in that location.
Domicile Streamliner'south Take:
When reading reviews on Amazon and other east-commerce sites, exist careful of DIY tips.
Very oftentimes, descriptions for smart lighting products are very like on these sites. Fifty-fifty the names are oftentimes near identical. Sometimes only a code distinguishes between the 2.
This ways that people often write reviews for the wrong products on a production folio. Individuals take spoken nigh cutting an RGBIC strip without it losing its function, for example. I'thou not proverb they're lying. Merely information technology is quite easy to write a review for an RGB strip under the production description of an RGBIC strip from the same brand. It's an honest mistake.
So take these tips with a pinch of common salt. In most cases, the manufacturers' advice is all-time when request DIY questions.
If yous found this article helpful, delight let u.s. know by voting, cheering us on, and sharing it with friends and colleagues.
Source: https://www.homestreamliner.com/install-strip-lights-around-corners/
0 Response to "How To Do Corners With Led Lights"
Post a Comment